Wire Drawing Machine
Ls-1-6/560Type
(1)Usage:The set of the machines is a ideal equipment drawing wire stock of high, medium and steel, as well as copper, alumium, and alloy. The machines are applied to drawing wire in the factories such as wire-steel factory, metal mesh factory and nail making factory etc.
(2)Structure:The equipment consists of main reduction box, die casing, wheel frame, sash brace and electrical control control system. The spinning drawing blocks are driven by JZT series motor, with gear coupling runs changeful gears. The drawing blocks are verticaly fixed in sealed box body. The gear pair are lubricated with oil.
In order to lower residual heat on the surface of the block, the cooling means is installed in interwall of the block. The wortle is soaked in cooling watr to reduce its working temperature.
The machine runs with carwl or linkage. The safety halt is installed by the position of operating block.
Type 800 560 450 350
Material intensity   db>=110kg/mm2 128kg/mm2 db<=140kg/mm2
Max diam of material 10-14 605mm 3.4mm 2.5mm
Min diam of material 6.0 2mm 1mm 0.75mm
Diam of block 1-800 1-6/560 1-7/450 1-6/350
Max average condensation 25% 30% 20% 21%
Total condensation   78-88.5% 77.9% 78%
Max, speed of block 0.4mm/min 245m/min 346.9m/min 200m/min
Total power 80 18.5-30kw 7.5-11kw 7.5-11kw
Weight 4500kg 2000kg 1500kg 1000kg
Overal size 9730x3340
x2020mm
1700x1150
x1750mm
1520x810
x1750mm
1400x800
x1500mm

Back